Custom Curtains Guide

Choose your fabric, understand your measurements and save a considered configuration. Final production details and prices require confirmation.

How to measure curtains

Measure the rod or track span rather than the glass alone. Decide where each panel should start and end, then measure the finished drop from its actual hanging point.

Window width, flat width and finished width

Window width describes the opening. Rod span describes the area the curtains must cover. Flat width is fabric laid flat; finished pleated width is the width after the heading is formed. Do not apply fullness twice to a pleated finished width.

Example: a 100-inch rod covered by two unpleated panels at 2× fullness suggests 100 inches of flat width per panel. Two pleated panels covering the same rod suggest 50 inches of finished top width each. Hardware overlap and returns may require additional allowance.

Finished length

Measure from the curtain’s actual suspension point to your preferred hem position. Rings, hooks and tracks change that point. Measure the left, center and right sides and check uneven floors before production.

One panel or a pair?

One panel can draw to one side; a pair can open from the center. Our current configurator defaults to two panels per set. Dimensions are per panel, while quantity is the number of sets.

Common measurement mistakes

Avoid measuring glass alone, confusing a pair’s total width with width per panel, adding fullness twice, forgetting hardware allowances or assuming every window is identical.

Hanging styles

Explore rod pocket, ring top, grommet, pinch pleat and tailored pleat options. Pinch and tailored pleats include the configured fullness factor. Confirm the exact heading construction, hooks and hardware compatibility with us before ordering.

Privacy vs blackout lining

Privacy lining softens incoming light and adds body; blackout lining is intended for stronger light reduction, especially in bedrooms. Actual room darkness also depends on the face fabric, edge gaps and installation. Review the individual product and confirm the lining specification; no universal blackout percentage is promised.

Installation planning

Choose a suitable rod or track and verify its load rating and fixing requirements. Heading types use different suspension points. Follow the hardware manufacturer’s installation instructions; mounting depends on your wall and hardware.

Curtain width planning tool

This is a planning illustration, not a guaranteed production size. Use rod or track span, not window glass width. Confirm overlaps, returns and hardware allowances separately.

Planning estimate only. Confirm all production dimensions before ordering.

Fabric swatches: before you choose

Our swatch product is being prepared and is not currently available for online purchase. Contact us to confirm available fabrics, sample dimensions, composition and delivery terms. Compare samples beside your walls, furniture and flooring in daylight and evening light. A swatch does not reserve full-length fabric stock.

Ask about fabric swatches ↗
Explore curtains ↗